SMA 40 - BER | APV

The unique spring technology in the SMA 40 minimizes the impact load on the turning cutting plates and drives during processing.

Energy
Maximum chamfer width [mm]
0 - 15
Radius [mm]
1,2 | 2 | 2,5 | 3 | 4 | 6 | 8
Chamfer angle
0° - 80°

Price on request

PDF-Download:

SMA 40 - BER | APV

* Mandatory fields

The SMA 40-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 16 mm is possible in NE-metals and a chamfer width of up to 12 mm in steel.  In addition to this, a radius processing of 1.2 mm to 8 mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 40 is equipped with a speed control and should be preferably used for stainless steel processing. 

The cutter heads are available for chamfer angles between 0° - 80°. The processing of drill holes is already possible starting at a diameter of > 28 mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø 10 mm to Ø 20 mm depending on application.

2063
  •     Electrical design with booster technology for a higher material removal rate
  •     Spring technology for higher service life of cutting inserts
  •     Speed regulation for electrical design
  •     Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes
  •     Replaceable cutter head for different chamfer angles 0° - 80°
  •     Easy and vibration-free work
  •     For processing of drill holes with a diameter of > 10 mm
  •     Up to 16-times usable turning cutting plates
  •     Ergonomic two-hand operation
  •     Optimal for attachment of radii for painting treatment, coatings and corrosion protection
Technical dataSMA 40 - BERSMA 40 - APV
Motor1,75 kW | 2.000 - 7.600 rpm1,75 kW | 2.000 - 7.600 rpm
Energy230 V, 50/60 Hz2.400 l/min | 6 - 7 bar
Maximum chamfer width15 mm15 mm
Guide ball bearingmin. Ø 26,3 mmmin. Ø 26,3 mm
Cutter head0° - 80°0° - 80°
Weight10 kg10 kg
Item No.7147171981